 | Summary |
|
| 1 |
How do I request samples? |
| 2 |
Help Registering / Why Register |
| 3 |
Forgot Password or Locked Account? |
| 4 |
How can I change My Account password? |
| 5 |
Application tooling for a specific part number |
| 6 |
How do I contact Tyco Electronics? |
| 7 |
Unable to find the product or part number for which I am searching. |
| 8 |
Relays and Contactors |
| 9 |
Does Tyco Electronics sell automotive connectors? |
| 10 |
Where can I get a RoHS Statement of Conformance by part number? |
| 11 |
What hand tools and crimpers are available from Tyco Electronics? |
| 12 |
AMP-LATCH header latches |
| 13 |
Lead-Free Requirements |
| 14 |
I have a Tyco Electronics part number, but I would like to see a similar yet different part. |
| 15 |
FASTON terminals loose piece p/ns |
| 16 |
How to access CAD Model Search? |
| 17 |
Hand tool repair |
| 18 |
Where is the cross-reference to mating connectors? |
| 19 |
Are TYCOFAX documents (drawings, specifications, instruction sheets, catalog pages) available via the Online Product Catalog? |
| 20 |
How can I find a list of your authorized distributor locations and phone numbers? |
| 21 |
Applicator log sheet / parts list |
| 22 |
High Speed, High Density interconnect system |
| 23 |
M24308 connectors |
| 24 |
How do I place a crimp height special wire combination request? |
| 25 |
Cross referencing a part number to an RoHS compliant part number? |
| 26 |
Does Tyco Electronics have Material Declarations for their products? |
| 27 |
What do ELV and RoHS stand for? |
| 28 |
RJ-45 |
| 29 |
COPALUM Connector system |
| 30 |
CHAMP System 5 female connector |
| 31 |
I cannot view drawings or specifications. |
| 32 |
How to use our Product Feature Selector |
| 33 |
AMPSEAL |
| 34 |
How Does a Power Line Interference Filter Work? |
| 35 |
CPC housings and contacts |
| 36 |
FASTON terminals current rating |
| 37 |
Have a specific question or can’t find what you looking for? |
| 38 |
Extraction tools |
| 39 |
How do I find out if a Product is RoHS or ELV compliant? |
| 40 |
Agastat relays |
| 41 |
Cage code number |
| 42 |
Are Tyco Electronics compliant (lead free) products backward compatible? Can I use RoHS compliant products (“lead free”) in my current tin-lead solder process? |
| 43 |
USB Connectors |
| 44 |
How can I find compliance and cross reference information on a list of part numbers I am interested in? |
| 45 |
CT board mount headers available in surface mount |
| 46 |
Is Tyco Electronics going to provide products for EU RoHS “lead in solder” exemption; sometimes referred to as “5 of 6” compliance? |
| 47 |
M55302 connectors |
| 48 |
CPC (Circular Plastic Connectors) arrangement numbers |
| 49 |
I’ve found the compliant part number that I am interested in, how do I get the technical documentation (customer drawing, application specification)? |
| 50 |
I’ve heard about tin whiskers. What are they and should I be concerned? |
| 51 |
How do I cross a non- Tyco Electronics part number (competitor) to a Tyco Electronics part and find compliant status |
| 52 |
CHAMP connector contacts - replacement |
| 53 |
Does Tyco Electronics label products that are EU RoHS compliant? |
| 54 |
RF coax connector center pin |
| 55 |
Board mount relay socket |
| 56 |
When will RoHS compliant products be available from Tyco Electronics? |
| 57 |
“Soft Shell” connectors |
| 58 |
Terminals for magnet wire |
| 59 |
RF: 50 ohm coax connectors for 75 ohm coax cable |
| 60 |
What are some of the features that will be common in both the new Z-PACK HM-Zd and Tyco Electronics existing Z-PACK 2mm HM (IEC 61076-4-101) connectors? |
| 61 |
How do you Specify a Power Line Filter? |
| 62 |
What do the RoHS/ELV and process codes mean on the part number reports? |
| 63 |
What is the force required to compress a column - HXC125? |
| 64 |
How is Insertion Loss Measured? |
| 65 |
Non-magnetic d-subminiature connectors |
| 66 |
Taper pin connectors |
| 67 |
What is Tyco Electronics’ strategy for issuing new part numbers for RoHS compliant parts? |
| 68 |
Is Tyco Electronics going to support “leaded” compliant pin (pressfit) connector products? |
| 69 |
Understanding Hipot Testing |
| 70 |
How do you Select a Power Line Interference Filter? |
| 71 |
What is the current rating of the signal pins - MultiGig RT? |
| 72 |
What are the Significant Requirements of UL and CSA? |
| 73 |
Is Installation Important to Filter Performance? |
| 74 |
What is a Power Line Interference Filter? |
| 75 |
What is Radio Frequency Interference (RFI)? |
| 76 |
What are the VDE Requirements? |
| 77 |
Why Be Concerned with RFI? |
| 78 |
COPALUM contractors/distributors |
| 79 |
How is China RoHS different from EU RoHS? |
| 80 |
What is the Concept of Power Line Filters as "Impedance Mismatching Networks"? |
| 81 |
High Voltage Connectors |
| 82 |
Material and plating for high temp terminals |
| 83 |
Is information regarding current carrying capacity of a product available on your site? |
| 84 |
Eurocard DIN 41612 type R, C , Q and B mateability |
| 85 |
XFP |
| 86 |
Fiber Optic connectors: LightCrimp and LightCrimp Plus |
| 87 |
50- and 75-ohm board mount RF coax products |
| 88 |
Circular mini-DIN plug |
| 89 |
Cable ties |
| 90 |
RJ-21 |
| 91 |
What PC board plating can I use - HXC125? |
| 92 |
Circular DIN plug and receptacle that lock together when mated |
| 93 |
Micro CPC, mating cycles |
| 94 |
Multigig RT |
| 95 |
Ultra-SCSI connector |
| 96 |
MTBF |
| 97 |
How many times can I cycle the socket - HXC125? |
| 98 |
Metrimate connectors current rating |
| 99 |
Understanding Leakage Current |
| 100 |
Where can I find information on Tyco Thermal Controls products? |
| 101 |
M Series housings - temperature ratings |
| 102 |
M Series Housing materials |
| 103 |
CHAMP connectors UL flammability rating |
| 104 |
.025 centerline ribbon cable mate for Series I receptacle |
| 105 |
Is MultiGig RT second sourced? |
| 106 |
Ferrule |
| 107 |
Do the Gigabit Ethernet media converters support 100Mbit/s Fast Ethernet operation on the RJ-45 port? |
| 108 |
What is the per-pin insertion/mating force - MultiGig RT? |
| 109 |
How do I cross reference a brand part number to Tyco? |
| 110 |
How Do You Know Which Filter to Test? |
| 111 |
Category 5 jack panel mount |
| 112 |
How do you Perform Conducted Emission Tests? |
| 113 |
Can the MultiGig RT1 and MultiGig RT2 modules be intermixed on a board? |
| 114 |
LC connectors |
| 115 |
Category 5 modular plug |
| 116 |
Returning applicators and hand tools |
| 117 |
Heat Gun |
| 118 |
What are the requirements of China RoHS? |
| 119 |
AMP-BARREL IDC terminals reusable |
| 120 |
What has Tyco Electronics done in support of China RoHS? |
| 121 |
Flexstrip |
| 122 |
What is BER? |
| 123 |
How does Tyco plan to provide a mid plane solution with the wide ground blades on the backplane? |
| 124 |
Type 1, 150 ohm STP cable connector obsolete |
| 125 |
What are the most important characteristics of this connector family - HM-Zd? |
| 126 |
AMPMODU System 50 or 50/50 Grid connectors for discrete wire |
| 127 |
D-3000 marked on connector |
| 128 |
Do you offer 3-D CAD models? |
| 129 |
Cable for AMPOWER Wave-Crimp system |
| 130 |
CPCI |
| 131 |
Why are so many companies offering differential board to backplane connectors - HM-Zd? |
| 132 |
How has Tyco Electronics determined the appropriate Environmental Protection Use Period time frame for our products? |
| 133 |
Small quantity of open barrel terminals in strip form |
| 134 |
What centerline pitches are available - HXC125? |
| 135 |
If my current product is non-compliant, how do I find the compliant part number? |
| 136 |
Can these sockets be used with via-in-pad or solid pad with offset via - HXC125? |
| 137 |
How did you choose the name for this new connector - HM-Zd? |
| 138 |
What are the minimum and maximum printed board thicknesses required for MultiGig RT connectors? |
| 139 |
CHAMP Connector for Category 5 |
| 140 |
Why was it necessary to design a connector that would be based on the existing 2mm Hard Metric (IEC 61076-4-101) connector standard? |
| 141 |
Ultra-Pod hand tool |
| 142 |
What are the FCC Requirements? |
| 143 |
How do you Perform Susceptibility Testing? |
| 144 |
What are the Test Methods for Verification of the Important Specification Parameters? |
| 145 |
Connectors with VDE approval |
| 146 |
Why Be Concerned With Safety Agency Requirements? |
| 147 |
How can I cross reference a milspec number to Tyco? |
| 148 |
SDL vs. modular plugs/jacks |
| 149 |
How do I get access to the PCN System? |
| 150 |
What are Tyco Electronics’ plans for continued support of non-compliant (“leaded”) product? |
| 151 |
Micro MaTch connectors |
| 152 |
ATUM |
| 153 |
I have two systems which will use different surface finishes for the vias, is there be a different drilled and finished hole specification for the different surface finishes (ie. OSP, Immersion Gold, Tin, Tin-lead, Bare Copper) - MultiGig? |
| 154 |
Eurocard DIN 41612 connectors plating |
| 155 |
Hermaphroditic connector - single wire |
| 156 |
What backup plate thickness do I need - HXC125? |
| 157 |
What is the current rating of the MultiGig RT power connector contact? |
| 158 |
What is Insertion Loss? |
| 159 |
M Series contacts |
| 160 |
Smart Card connectors |
| 161 |
.100 x .100 centerline, .025 inch square post product |
| 162 |
What is graded index fiber? |
| 163 |
Airbag Connectors |
| 164 |
Are there ProE and IGES models available for MultiGig RT and how do I get them? |
| 165 |
Can I use organic or ceramic packages - HXC125? |
| 166 |
Basic differences between a PolySwitch device and a fuse |
| 167 |
Power Lock current rating |
| 168 |
What are the Modes of Propagation of RFI? |
| 169 |
Why did ERNI and Tyco Electronics come together to collaborate on this new connector - HM-Zd? |
| 170 |
How can I receive PCN e-mail directly? |
| 171 |
How does Tyco Electronics differ from its competitors? |
| 172 |
Circular DIN gold plated |
| 173 |
RMA (return material authorization) to return tooling |
| 174 |
Do I have to use guide pins in any possible configuration - MultiGig RT? |
| 175 |
How can I find electrical modeling information? |
| 176 |
How do I compare products in the Product Feature Selector? |
| 177 |
What Can Insertion Loss Data be Used For? |
| 178 |
Hold Current and Trip Current |
| 179 |
Applications for Polyswitch devices |
| 180 |
RF Coax cable number - connectors needed |
| 181 |
CHAMP connector approvals |
| 182 |
Eurocard connectors product spec |
| 183 |
Failure mode of Polyswitch |
| 184 |
Polyswitch for temperature control |
| 185 |
What is the flatness tolerance of the PC board - HXC125? |
| 186 |
Polyswitch in parallel |
| 187 |
Selecting a socket for a microprocessor |
| 188 |
Multilock connectors |
| 189 |
Max temp for Polyswitch |
| 190 |
Card edge connectors for PCB over .062 thick |
| 191 |
“Telco” connector |
| 192 |
CHAMP / Telco terminals plating |
| 193 |
AMP-LATCH short latch height |
| 194 |
What should I do if I do not want to receive the PCN e-mail summary notices directly? |
| 195 |
Polyswitch current levels |
| 196 |
What are the Additional Aspects of VDE Safety Requirements? |
| 197 |
What does strip and loose piece mean? |
| 198 |
Standard Circular DIN |
| 199 |
What is the contact resistance between the compliant pin and the plated-through hole - MultiGig RT? |
| 200 |
Polyswitch self-resetting |
| 201 |
Ultrafast and Ultrafast Plus |
| 202 |
I have questions regarding PCN details, who should I contact? |
| 203 |
Micro CPC |
| 204 |
Metrimate connectors voltage rating |
| 205 |
How do I clean my board - HXC125? |
| 206 |
Are there signal integrity models available for MultiGig RT and how do I get them |
| 207 |
What is the PCI Mezzanine Card (PMC) Connector? |
| 208 |
Do All Filter Networks with the Same Circuit and Element Values Perform Identically? |
| 209 |
Where do I find information on Alcoswitch and other switch products? |
| 210 |
How do check distributor inventory? |
| 211 |
Mate SMB with SMA connector |
| 212 |
Polyswitch cycling |
| 213 |
Polyswitch suffix |
| 214 |
Line voltage applications |
| 215 |
How do I print "oversize" PDF drawings on a single sheet? |
| 216 |
What applications will the Z-DOK+ target? |
| 217 |
Do I need a backup plate - HXC125? |
| 218 |
Polyswitch voltage and interrupt current |
| 219 |
Polyswitch and overvoltage devices |
| 220 |
How do I access IFX file exchange system? |
| 221 |
Are there unique connector options for differential and Single Ended architectures? |
| 222 |
Solder composition used in Polyswitch |
| 223 |
CHAMP .050 connectors Series I and Series II not intermatable |
| 224 |
MIL-C-39012 Full Qualification for SMA |
| 225 |
Positive Lock - housings required? |
| 226 |
What other modules are currently being evaluated by Tyco - HM-Zd? |
| 227 |
Tel Splice connectors |
| 228 |
How do Tyco Electronics antennas work? |
| 229 |
Netconnect Cat 3, Cat 5, and Cat 6 products |
| 230 |
What standards does the Tyco 4x and 12x connector meet? |
| 231 |
Polymeric positive temperature coefficient |
| 232 |
TERMI-POINT compatible with wire-wrap systems? |
| 233 |
Terminator use |
| 234 |
Identifying a Polyswitch device |
| 235 |
Resistance of Polyswitch |
| 236 |
Is there an electrical test board and cable assemblies available - ZFP I/O? |
| 237 |
Are these Tyco 4x and 12x cable assemblies available through distribution? |
| 238 |
Circular DIN plug assembly - 7 position |
| 239 |
Mini CPC |
| 240 |
How can I change the recipient who is directly receiving the PCN? |
| 241 |
What testing is complete or planned for the MultiGig RT family of connectors? |
| 242 |
What software do I need to manage the switches that have terminal ports? |
| 243 |
How long of a ground plane is required? |
| 244 |
Tripped resistance |
| 245 |
On an Search for Parts screen, how do I "undo" a feature? |
| 246 |
G-Series contacts |
| 247 |
What is the operating temperature range of Z-Dok? |
| 248 |
Mini CPC, max temp |
| 249 |
What is the unmating force required to disengage Z-Dok plugs and receptacles? |
| 250 |
Antenna Ground Plane |
| 251 |
What is the card-to-card spacing in a system, which utilizes Z-Dok? |
| 252 |
Polyswitch tripped state time |
| 253 |
Shelf life of polyswitch device |
| 254 |
Low profile wire-to-board connector system |
| 255 |
RJ-11 |
| 256 |
I cannot manage my switch using my terminal emulation program, what could be the reason for this? |
| 257 |
Automatic reset conditions |
| 258 |
Do I need a backup plate insulator - HXC125? |
| 259 |
I have changed the switch settings on the 10/100Mbit/s media converter but this has made no difference to the performance of the media converter, why? |
| 260 |
PC-104 |
| 261 |
Polyswitch approvals |
| 262 |
Do I have to use end-caps in any possible configuration - MultiGig RT? |
| 263 |
Multimode FC connectors |
| 264 |
What is Bandwidth? |
| 265 |
Are the Tyco 4x and 12x cable assemblies equalized? |
| 266 |
ESD protected AMPLIMITE D-sub connector |
| 267 |
Resistance sorting |
| 268 |
What is the maximum packet size supported by the 10/100Mbit/s media converters? |
| 269 |
What is the mating force required to engage Z-Dok plugs and receptacles? |
| 270 |
AMP-LATCH long latch height |
| 271 |
Ribbon Cable |
| 272 |
What is the nominal contact wipe provided when mating Z-Dok plugs and receptacles? |
| 273 |
Is Z-Dok acceptable for use as a docking connector? |
| 274 |
Telecom industry standards |
| 275 |
How do I calculate the mated stack height for 0.8mm Free Height connector? |
| 276 |
Effects of pressure |
| 277 |
Micro CPC, max temp |
| 278 |
Polyswitch voltage-drop |
| 279 |
Circular DIN cable mount receptacle |
| 280 |
How can I cross reference a competitor part number to Tyco? |
| 281 |
How do I request literature? |
| 282 |
Does Z-Dok provide sequencing levels between signal and ground? |
| 283 |
Ribbon cable receptacles - height of mated pair |
| 284 |
Cleaning a Polyswitch |
| 285 |
Potting a Polyswitch device |
| 286 |
Category 5 modular coupler |
| 287 |
MTA |
| 288 |
Do the media converters auto-negotiate with other vendors products? |
| 289 |
Polyswitch resistance |
| 290 |
When in Auto-negotiation mode, why is the media converter is in half-duplex even though the connected device is full duplex, why? |
| 291 |
Why does the 10/100Mbit/s media converter have a DIP switch to fix the settings at 100 Mb/s full-duplex? |
| 292 |
Why does the PSU LED on the Chassis flash and the Chassis does not seem to start correctly? |
| 293 |
How many fibers fit into a standard MPO, MT, or MPX connector? |
| 294 |
Mating tabs for taper tab receptacles |
| 295 |
HSSDC Products |
| 296 |
What is the contact plating thickness in the Z-Dok ? |
| 297 |
HDZ connector |
| 298 |
PICABOND Splices |
| 299 |
What are the typical applications for ZFP I/O? |
| 300 |
CHAMP connector durability |
| 301 |
Which geometrical connector parameters are important for long term reliability? |
| 302 |
Faceplates for Category 5 and Enhanced Category 5 |
| 303 |
TERMI-FOIL Terminals inside oil filled devices |
| 304 |
What is the recommended PTH for Z-Dok? |
| 305 |
Polyswitch in series |
| 306 |
What is the ZFP I/O? |
| 307 |
How is the Tyco Electronics antenna fed? |
| 308 |
Resistance after reset |
| 309 |
Open and closed barrel terminals in the same applicator? |
| 310 |
Why is there a switch to set the duplex mode of the fibre? |
| 311 |
What advantages do Tyco Electronics embedded antennas provide over traditional whip antennas? |
| 312 |
Polyswitch expansion |
| 313 |
AMP-LATCH ribbon cable connector high temperature housings |
| 314 |
Plastic SC to FC duplex adapters - replacements |
| 315 |
Polyswitch coating |
| 316 |
LDI Communcation Components - package styles |
| 317 |
General Purpose Interface Bus (GPIB) |
| 318 |
Can PolySwitch devices be bent? |
| 319 |
Fiber Optic Transceivers |
| 320 |
Why should I use a fiber optic solution instead of a copper solution? |
| 321 |
What is the housing material in Z-Dok? |
| 322 |
SMA products intermate with competition |
| 323 |
Can the guide modules be used for first-mate ground - MultiGig RT? |
| 324 |
MT-RJ connectors |
| 325 |
Polyswitch in space |
| 326 |
High Current products |
| 327 |
What SSL settings should be used for best website performance? |
| 328 |
PCMCIA cards |
| 329 |
Does Tyco Electronics offer different types of antennas for different mounting requirements? |
| 330 |
What is the withstanding voltage of Z-Dok? |
| 331 |
Why should Tyco Electronics design my antenna instead of designing one in-house? |
| 332 |
What is the durability rating of Z-Dok? |
| 333 |
Circular DIN board mount receptacle - right angle only |
| 334 |
How do I change the batteries on my remote control car? |
| 335 |
Do Tyco Electronics antennas require any tuning components? |
| 336 |
.100 x .100 inch centerline ribbon cable product |
| 337 |
LDI High Power Lasers - qualifications |
| 338 |
FFC cable splitting not recommended |
| 339 |
IBM Serpent connector discontinued |
| 340 |
How much contact wipe do I get with the standard PC wafer design - MultiGig RT? |
| 341 |
Economy Interconnect connector used in the 3 ½” disc drive |
| 342 |
10 position modular plug |
| 343 |
Multi-fiber ribbon cable applications |
| 344 |
SCSI |
| 345 |
Why should I use tuned connectors in the system? |
| 346 |
What is included in the test kit - ZFP I/O? |
| 347 |
How can I fix the switch ports into 10 Mb/s or into half-duplex? |
| 348 |
What is the low level contact resistance of Z-Dok? |
| 349 |
Over which frequencies do Tyco Electronics antennas operate? |
| 350 |
LDI Communcation Components - Customer supplied device |
| 351 |
MTA Feed Thru |
| 352 |
What is the effective operating bandwidth of Z-Dok? |
| 353 |
There are right and left end signal modules, do I need special right and left guide modules on the backplane - MultiGig RT? |
| 354 |
MTA Closed End |
| 355 |
What is the return loss of Z-Dok? |
| 356 |
LDI High Power Lasers - custom packaging |
| 357 |
LDI High Power Lasers - package styles |
| 358 |
What is attenuation? |
| 359 |
AC outlets |
| 360 |
WDM |
| 361 |
LDI High Power Lasers - wavelengths |
| 362 |
Do the switches auto-negotiate with other vendors products? |
| 363 |
CT cable connectors for IDC |
| 364 |
High Density Rectangular (HDR) connectors for board to board applications |
| 365 |
Filtered (decoupled) BNC product |
| 366 |
For which applications are Tyco Electronics antennas designed? |
| 367 |
Why not just use an off the shelf embedded antenna solution? |
| 368 |
Why should I use a Tyco Electronics Antenna rather than a competing embedded solution? |
| 369 |
Panel mount modular jacks |
| 370 |
What solder tail lengths are available with the Z-Dok connector? |
| 371 |
Antennas Digital Technology |
| 372 |
LDI High Power Lasers - power range |
| 373 |
CHAMP Connectors meet FCC requirements |
| 374 |
What are the typical cable lengths - ZFP I/O? |
| 375 |
What is the backplane speed of the Tyco switches? |
| 376 |
LDI Communcation Components - detector sensitivity |
| 377 |
Can the Single Ended and Differential versions of MultiGig RT be used in the same housing? |
| 378 |
Category 5 jacks - enhanced vs. standard |
| 379 |
What is the differential impedance of Z-Dok? |
| 380 |
Is Tyco 4x and 12x intermateable with MicroGiga CN? |
| 381 |
Mini circular DIN receptacles - surface mount compatible |
| 382 |
SC duplex connectors disassembly not possible |
| 383 |
What is the base alloy for the Z-Dok contacts? |
| 384 |
What is the Current rating of Z-Dok? |
| 385 |
What is the maximum number of differential pairs available for Z-Dok+? |
| 386 |
What is the insertion loss of Z-Dok? |
| 387 |
Is the Tyco 4x and 12x product the same as MicroGiga CN? |
| 388 |
What are the NEXT (Near End Cross Talk) and FEXT (Far End Cross Talk) values for Z-Dok? |
| 389 |
What is the minimum number of “Utility” modules per connector for Z-Dok+? |
| 390 |
What is Return (reflection) loss? |
| 391 |
ESD protected AMPLIMITE connector protection |
| 392 |
What is the max current of the power contacts for Z-Dok+? |
| 393 |
LDI Communcation Components - Ruggedized package |
| 394 |
MDS - Multi-Media Distribution System |
| 395 |
What is the voltage rating of Z-Dok? |
| 396 |
How many high-speed pairs are avialable in the ZFP I/O interconnect system? |
| 397 |
What is the nominal contact engagement of the Z-Dok connector? |
| 398 |
What is the within pair skew of Z-Dok? |
| 399 |
LDI Communcation Components - Data Rates |
| 400 |
What is the number of the Electrical test Kit Document - ZFP I/O? |
| 401 |
Performance of zinc die cast shell SMB connectors |
| 402 |
What sizes of the Z-Dok are available? |
| 403 |
Is the ZFP I/O designed for signle-ended or differential pair applications? |
| 404 |
Why have I lost 'My Account' Resources? |
| 405 |
What is the Revalidation Process? |
